Tensile Strength Of Concrete Using Artificial Sand

  1. Home
  2. / Tensile Strength Of Concrete Using Artificial Sand

Strength And Durability Of High Performance Concrete Using

Apr 01, 2006 Strength and Durability of High Performance Concrete Using Artificial Sand M. Kalaiarasu 2006-04-01 00 00 00 R E S E A R C H PA P E R S STRENGTH AND DURABILITY OF HIGH PERFORMANCE CONCRETE USING ARTIFICIAL SAND BY SRI.M.KALAIARASU, DR.K.SUBRAMANIAN Selection Grade Lecturer, Professor and Head of the Department of Civil Engineering, Department.

Compressive And Tensile Strength Of Artificially Cemented

When 15 silica fume is added along with 60 of quartz sand, it can be seen that the compressive strength increased by 19.16 than conventional, split tensile strength increased by 7.2 than.

Flexural And Tensile Strength Properties Of Concrete Using

Corpus id 20784727. flexural and tensile strength properties of concrete using lateritic sand and quarry dust as fine aggregate @inproceedings{ukpata2012flexuralat, title={flexural and tensile strength properties of concrete using lateritic sand and quarry dust as fine aggregate}, author={j. o. ukpata and e.

Strength Evaluation Of Single Adhesive Concrete Anchors

Mar 01, 2012 Title Strength Evaluation of Single Adhesive Concrete Anchors Under Tensile Load Using Artificial Neural Networks Author(s) A.M. Said and S.E. Robinson Publication Symposium Paper Volume 283 Issue Appears on pages(s) 1-20 Keywords adhesive, anchors, concrete, neural network, post-installed, bond failure Date 3 1 2012 Abstract Adhesive-bonded anchors are increasingly adopted as.

Compression And Split Tensile Strength Of Concrete

Mar 18, 2014 In case of tensile split strength test reduction in strength for Cement, Artificial sand, Stone crushed aggregate (CAS), Cement, Natural sand, Recycled aggregate (CNR), Cement, Artificial sand-Recycled aggregate (CAR) by 2.89 , 4.80 7.05 respectively in comparison with CNS.

Strength Of Concrete Containing Different Types Of Fine

Compared to Natural Sand, Artificial Sand combination of Natural Sand Artificial Sand, which found to be 5 with 100 replacement of Natural Sand in conven-tional concrete mix. In case of cylinder for Tensile strength, Grit has given maximum Tensile strength 7.12 MPa, which is quite than other. 5 CONCLUSION.

Compressive And Tensile Strength Of Concrete Using

Specifically compressive and tensile strength ranged from 21.06-35.2 N mm2 and 10.06-15.5 N mm2 for the mixes considered. These results compare favourably with those of conventional concrete. The concrete was found to be suitable for use as structural members for buildings and related structures, where laterite content did not exceed 50 .

Experimental Study On Properties Of Concrete Using

Strength of concrete. The cube compressive strength for different mixes at period of 7 and 28days are given as below. 4.2 Cylinder split tensile strength . The split tensile strength of specimens also showed that the optimum mix with 20 of bottom ash with 1.0 ppf. The split tensile strength for different mixes at.

(pdf) Compressive And Tensile Strength Of Concrete Using

CaO 52.38 Concrete made with lateritic sand and lime stone filler as MgO 1.68 complete replacement for conventional river sand fine SO2 0.26 aggregate in concrete can attain or less same Blaine specific 390 compressive strength, tensile strength, permeability, surface [m2 kg] modulus of rupture and lower degree of shrinkage as the control.

Experimental Study On Strength Of Concrete By Using

Include workability of fresh concrete, compressive strength, flexural tensile strength, splitting tensile strength , modulus of elasticity for hardened concrete. Rice husk ash content was use from 0 to 20 in the interval of 2.5 in weight basis. It was found that the strength of concrete reduces after further addition of.

Experimental Study On Strength Of Concrete By Using

Strength, flexural tensile strength, splitting tensile strength , modulus of elasticity for hardened concrete. Rice husk ash content was use from 0 to 20 in the interval of 2.5 in weight basis. It was found that the strength of concrete reduces after further addition of 12.5 of rice husk ash. So to improve the strength of concrete.

An Experimental Study On Self Curing Concrete

5.2 SPLIT TENSILE STRENGTH OF CONCRETE The Split Tensile Strength Results of Concrete in cylinder Specimens for 7, 14 and 28 days are presented in the Table and the comparisons of the results. Table 4 Split Tensile Strength Test Result for Cylinders 7 days 14 days 28 days Control mix 1.726 1.95 2.05 Polyethylene glycol (400) With fiber (2 ).

Predicting The Compressive Strength Of Desert Sand

Dec 17, 2020 Desert sand is one of the current research hotspots in alternative materials for concrete aggregates. In the process of practical application, compressive strength is an essential prerequisite for studying other properties. Based on the current research situation, a prediction technology of compressive strength of desert sand concrete (DSC) is proposed based on an artificial neural network.

Mane Prediction Of Tensile Strength Of Concrete Produced

To construct the model, 25 input parameters were used to achieve one output parameter, referred to as the tensile strength of concrete containing partly pozzolanic materials and manufactured sand. The results obtained in both, the training and testing phases strongly show the potential use of ANN to predict 28 days tensile strength of concretes.

Effect Of Sand Content On The Workability And Mechanical

Jan 29, 2019 The objective of this study is to examine the workability and various mechanical properties of concrete using artificial lightweight aggregates produced from expanded bottom ash and dredged soil. Fifteen concrete mixes were classified into three groups with regard to the designed compressive strengths corresponding to 18 MPa, 24 MPa, and 35 MPa. In each group, lightweight fine aggregates were.

Benificial Reuse Of Waste Foundry Sand In Concrete

Foundry sand and used foundry sand. Concrete performance was evaluated with respect to compressive strength, tensile strength, and modulus of elasticity. At 28-day age, concrete containing used foundry sand showed about 20-30 lower values than concrete without used foundry sand. But concrete containing25.

Prediction Of Rubber Fiber Concrete Strength Using

Jan 28, 2021 The testing content considers the 28-day compressive strength, split tensile strength, and flexural strength tests of rubber fiber concrete. According to the mix ratio of each group listed in Table 5 , the rubber fiber concrete specimens were prepared by referring to Standard for Test Methods of Mechanical Properties of General Concrete GB T.

Relation Between Compressive And Tensile Strength Of Concrete

Jan 06, 2020 Compressive Strength The main measure of the structural quality of concrete is its compressive strength. This property of concrete is commonly considered in structural design. Depending on the mix (especially the water-cement ratio) and time and quality of the curing, compressive strength of concrete can be obtained up to 14,000 psi or . Commercial production of concrete with ordinary.

Compressive And Tensile Strength Of Concrete

Index Terms compressive strength, lateritic sand, lime stone filler and tensile strength ----- -----1. INTRODUCTION This paper is part of a study investigating the structural characteristics of concrete using various combinations of lateritic sand and lime stone filler as complete replacement for conventional river sand.

Feasibility Of Artificial Sand In Concrete Dr Dhananjay

2.36 mm compressive strength and tensile strength by 29.44 00 1.18 mm 00 600 micron 00 300 micron 00 150 micron 00 TABLE VI QUANTITY OF MATERIAL (FOR MIX) SR. NO GRADE OF CONCRETE M 20.

Use Of Crushed Granite Fine As Replacement To River Sand

Slump, compressive and indirect tensile strength tests were performed on fresh and hardened concrete.28 days Peak compressive and indirect tensile strength values of 40.70N mm 2 and 2.30N mm 2 respectively was obtained, with the partial replacement of river sand with 20 CGF, as against values of 35.00N mm 2 and 1.75N mm 2, obtained with the.

Size Effect Studies On Concrete Made Of Natural And

Methods In order to study the size effect compressive and split tensile test were conducted on standard and high strength concrete (M30 and M60) specimens of two different sizes of cubes (150 x 150 x 150 mm and 100 x 100 x 100 mm) and cylinders (150 x 300 mm and 100 x 200 mm) made of natural and artificial sand.

Effect Of Using Different Types Of Sand On Workability

The artificial sand such as silica sand, lateritic sand M-Sand, the compressive strength is increased about 33.572 , 30.572 and 27.904 in M20 Grade of concrete. The durability.

Dataset Of Tensile Strength Development Of Concrete With

Feb 22, 2017 This article presents 755 groups splitting tensile strength tests data of concrete with manufactured sand (MSC) in different curing age ranged from 1 day to 388 days related to the research article “Experimental study on tensile strength development of concrete with manufactured sand” (Zhao et al., 2017) .These data were used to evaluate the precision of the prediction formulas of tensile.